1. A contract is on your desk
  2. Three ways to handle a contract, and what each one involves
  3. Factor 1: What is actually at stake
  4. Factor 2: Whose terms are on the table
  5. Factor 3: What the law overrides no matter what the contract says
  6. Factor 4: IP, data and shared ownership
  7. Factor 5: The cost of getting it wrong
  8. Where professional help is usually required, and how Artificer Legal helps
  9. Decide on the downside, not the price

A contract is on your desk

You have a contract in front of you. It might be a customer's standard terms you were asked to sign before your first invoice can go out, a supplier agreement your accountant forwarded with a note to check it, or a template you downloaded because a new client wants the engagement in writing. However it arrived, you face the same decision: whether to sign it as it stands, adjust it yourself, pay for a targeted review, or hand the drafting to a business contract lawyer. The right answer is rarely a general one. It depends on this contract, this deal, and what happens if it goes wrong.

Three ways to handle a contract, and what each one involves

Most business owners frame the choice as a free template on one side and a lawyer on the other. In practice there are three distinct tasks, and they are not a quality ladder. Working out which task your situation needs is most of the battle.

  • DIY with a template: The cheapest and fastest option. You download a generic agreement, change the names, and sign. What you are really doing is adopting legal drafting from an anonymous author who knows nothing about your business and owes you no duty. You inherit every gap and assumption in that document, including the ones you cannot see.
  • A targeted review: The right task when someone else drafted the contract. A lawyer reads the document for risk, flags the clauses that matter, and comes back with negotiation points and must-fix items. It is a defined piece of work, usually done for a fixed fee.
  • Full drafting and negotiation: The lawyer builds the agreement around your business model, your risk appetite and your industry, then negotiates it with the other side. It costs the most and gives you the most control.

Two assumptions tend to collapse when you look closely. A quick review is not a cheaper version of full drafting; it is a different task, and using one for the other leaves you with a contract that has neither been properly written nor properly checked. And a template is not a way of avoiding legal input. It is legal input from a stranger, applied to your deal, with the risk left on you.

Factor 1: What is actually at stake

The first question to ask about any contract is how much it costs you if it goes wrong. A one-off engagement worth a few hundred dollars, ending when the work is delivered, is a different proposition from a three-year supply agreement with a personal guarantee attached. Start with the size of the downside and work backwards.

  • Deal value: The larger the amount at risk, the more a review pays for itself.
  • Length of commitment: Multi-year terms, automatic renewals and evergreen clauses lock you in long after the deal stops suiting you.
  • Exit cost: Termination notice periods, early-exit fees and handover obligations can make leaving more expensive than staying.
  • Security given: Personal guarantees, retention of title and liens put your own assets behind the other side's performance.

If the worst-case figure here is one you would notice losing, professional input is worth weighing before you sign.

Factor 2: Whose terms are on the table

The direction of the drafting changes everything. There is a meaningful difference between a contract prepared by the other side and one you prepared yourself, and the law treats them differently.

  • Their standard form contract: The priority is review, because the other side wrote the terms in their own favour. Watch for one-sided indemnities, hidden fees, automatic renewal, limits on your remedies and clauses that make termination expensive. Under s 23 of the Australian Consumer Law (the ACL), which is Schedule 2 of the Competition and Consumer Act 2010 (Cth), an unfair term in a standard form consumer or small business contract is void.
  • Your own template: The priority is drafting quality, because the same regime applies to you. If your customer terms are a standard form contract, and a court will presume that they are unless you prove otherwise under s 27 of the ACL, an unfair term in them is void and unenforceable. Since the 2022 amendments, a business that proposes or relies on an unfair term can also be penalised under s 224 of the ACL.

The small business contract definition matters here. Under s 23(4) of the ACL, a contract is a small business contract for these purposes if at least one party employs fewer than 100 people or has a turnover under $10 million for its last income year. That captures most Australian SMEs, on either side of the deal.

Factor 3: What the law overrides no matter what the contract says

A contract cannot simply say whatever the parties agree. Australian law imposes a set of minimum standards that no clause can displace, and a well-drafted agreement is built around them rather than against them.

  • Consumer guarantees: Under s 64 of the ACL, any term that purports to exclude, restrict or modify the consumer guarantees is void. A clause saying "no refunds" does not work when a customer's goods are faulty; the guarantee applies regardless of what the contract says.
  • National Employment Standards: Under ss 55 and 61 of the Fair Work Act 2009 (Cth), the National Employment Standards are a floor that cannot be excluded by an award, an enterprise agreement or a contract of employment. Annual leave, maximum hours, notice of termination and the rest apply even if the written contract says otherwise.
  • Unfair contract terms: An unfair term in a standard form consumer or small business contract is void, and penalties can follow, as set out above.
  • Privacy obligations: If your business is covered by the Privacy Act 1988 (Cth), the Australian Privacy Principles apply to how you handle personal information, whatever your contracts say. Most businesses with annual turnover of $3 million or less are exempt under s 6D of that Act, but the exemption does not cover every small business. Carve-outs include businesses that provide a health service and hold health information, businesses that disclose personal information for a benefit, and credit providers.

The practical point is that templates carry a habit of including clauses that quietly contradict these regimes, such as blanket limitation of liability for consumer goods or no-leave provisions for employees. A lawyer who works with these regimes daily will spot the conflict before it becomes a dispute.

Factor 4: IP, data and shared ownership

Some deals put more than money at stake. If the contract decides who owns the work you create, the data you collect or the decisions you make together, the stakes are higher than the dollar value suggests.

  • Intellectual property: A client engagement may create designs, software, content or know-how. The contract should say who owns what, and what licence the other side gets. Silence leaves ownership to be argued about later.
  • Data: If you collect, share or process personal information under the deal, the contract needs to say who controls it, who can use it and what happens when the deal ends.
  • Shared ownership: When you bring on a co-founder, an investor or a business partner, a shareholders' agreement sets the ground rules for voting, vesting, exits and dispute processes. It is easier to agree these rules while the relationship is going well than to litigate them afterwards.
  • Your team: Written employment and contractor agreements handle role clarity, confidentiality and IP assignment from day one. They sit alongside the Fair Work obligations, including the requirement under s 125 of the Fair Work Act 2009 (Cth) to give every new employee the Fair Work Information Statement before or as soon as practicable after they start. Where an engagement has an identifiable end date, a Fixed Term Contract Information Statement is also required under ss 333J to 333K.

If the deal involves any of these, treat it as a signal that a template may not be enough.

Factor 5: The cost of getting it wrong

The last factor is the comparison that most people skip. A targeted review of a third-party contract usually costs a fraction of what one dispute costs, and drafting the core documents your business uses every day is cheaper than fixing the consequences of a gap. The question is not whether you can afford a lawyer. It is whether you can afford the version of events where the contract fails and no one can work out who owes what.

A practical approach used by many founders looks like this:

  • Start with the core documents: Invest in tailored customer terms, a key supplier agreement and, where relevant, employment contracts. These have the biggest day-to-day impact.
  • Use targeted reviews: When a third-party contract arrives, get a short fixed-fee review focused on the risks and the negotiation points.
  • Keep a plain-English checklist: Who owns the IP, what triggers payment, what the liability cap is. It helps you spot red flags before the contract reaches a lawyer.
  • Update as you grow: Revisit documents when products, pricing, markets, structure or the way you handle data change.

Professional help is usually the right call, not just a nice-to-have, in a handful of situations. A dispute, breach or termination that is already underway. A high-value or multi-year deal where the downside is large and unquantified. The core documents your whole business trades on. A transaction involving shared ownership, intellectual property or sensitive data. In those cases the cost of guessing is greater than the cost of advice.

An Artificer Legal practitioner helps you make the call and act on it. We stress-test the assumptions behind the decision, model what the downside actually looks like, and then do the work the chosen path needs: drafting the agreements, reviewing the terms the other side put in front of you, and coming back with the negotiation points that matter. The aim is to make the decision with the downside visible, not to hand you a document you do not understand.

Decide on the downside, not the price

The question that deserves the most effort is not whether you can afford a lawyer. It is whether you can answer what happens if this deal goes wrong, and who pays when it does. If you cannot answer that question about the contract in front of you, that is the moment to get advice. The review is cheaper than the dispute, and the drafting is cheaper than the fight about what the parties meant.

This guide has set out the three ways to handle a contract, from template to full drafting, and the factors to weigh: the value and duration of the deal, whose terms are on the table, the rules the law imposes regardless of what the contract says, the place of intellectual property and shared ownership, and the cost of a mistake. For a small, short and easily exited deal, a template may be enough. Where the downside is real and you cannot quantify it, professional help earns its fee. The threshold to watch for is the point at which you stop being able to answer what happens if it fails.