- Before you start: what you need in place
-
The process of making a contract, step by step
- Identify the parties and their authority to sign
- Agree the deal before you draft
- Confirm the elements of a binding contract
- Draft the essential terms in plain English
- Check the contract against the law that applies
- Execute the contract properly
- Store, monitor and vary
- Where the process usually goes wrong
- Where a lawyer fits in
- What decides whether your contract holds up
Most businesses reach a point where a deal that started with a handshake or a long email thread needs to become a contract. It may be your first significant client, a supplier you depend on, or your first employee. The moment usually arrives when the stakes get too high for goodwill to carry the relationship: more money, longer commitments, or intellectual property changing hands.
This guide walks through the process of turning that deal into a binding contract, in the order the law effectively requires it to happen. At the end you will have a signed agreement that sets out what each side must do, what each side gets, and what happens when something goes wrong. One point to understand before you start: making a contract is not the same as signing a document. A verbal agreement can bind you, and a signed document that is vague, illegal, or signed without authority may not bind anyone. The process is really about producing a clear, enforceable record of a genuine agreement.
Before you start: what you need in place
A handful of things should be settled before drafting begins. Work through this list first, because it is much cheaper to fix a problem here than after a dispute starts.
- A clearly identified counterparty: the other party's correct legal name, and for a company its ACN, so the contract binds the right entity rather than a trading name or a related company.
- An agreed commercial deal: what is being supplied, for how much, and by when, settled between the parties before anyone starts drafting.
- Consideration passing each way: something of value exchanged by each side, or a decision to use a deed where consideration is not available.
- A check on whether writing is required: guarantees, dealings in land and some credit contracts must generally be in writing and signed under state and territory legislation, and deeds have their own formalities.
- A view on the laws that will apply: whether the other side is a consumer or small business for the purposes of the Australian Consumer Law, whether you will handle personal information, and whether the contract is an employment arrangement.
- A decision that the document is meant to be binding: heads of agreement and memoranda of understanding are sometimes deliberately non-binding, and courts decide whether an arrangement was intended to be binding from all the circumstances.
The items that trip people up most are the first and the fourth. Signing with the wrong entity, or relying on a verbal guarantee or a verbal promise about land, can leave you with no enforceable contract at all.
The process of making a contract, step by step
Identify the parties and their authority to sign
Start with the parties' correct legal identities. An individual signs in their own name, a company signs as a company (name and ACN), and a trustee signs in their capacity as trustee of a named trust. A contract addressed to a trading name may not bind anyone.
Then check authority. A director or authorised officer can sign for a company, but the counterparty will want the signing to follow a method they can rely on. Section 127 of the Corporations Act 2001 (Cth) provides that a company executes a document if it is signed by two directors, or a director and a company secretary, or, for a proprietary company with a sole director, that director alone where they are also the sole secretary or the company has no secretary. A sole trader signs personally. A partner can usually bind the partnership in the ordinary course of its business. If you are dealing with someone who claims to act for another entity, ask for evidence of their authority before relying on their signature.
Agree the deal before you draft
Before a single clause is written, the commercial deal should be pinned down: the goods or services being supplied, deliverables, milestones and timelines, the price, how invoicing works and when payment falls due, and any dependencies, approvals or acceptance criteria. This is the stage where the parties' understanding of the deal is usually still aligned, which makes it the cheapest moment to resolve ambiguity.
This step also feeds directly into the legal requirement of certainty. A court can only enforce an agreement whose essential terms are clear enough to apply in practice. If the parties have not agreed what the deliverables are, the price, or the timeframe, no amount of careful drafting later can fix that.
Confirm the elements of a binding contract
For a contract to be binding, six elements must be present.
- Offer and acceptance: one party makes an offer and the other accepts it on those terms. An invitation to treat is not an offer; advertising your services is generally an invitation for customers to make offers. Acceptance can be communicated by email or inferred from conduct.
- Intention to create legal relations: both parties must intend the arrangement to be legally enforceable. In Ermogenous v Greek Orthodox Community of SA Inc [2002] HCA 8, the High Court confirmed that intention is assessed objectively from all the circumstances rather than by applying rigid presumptions.
- Consideration: each side must provide something of value, whether money, goods, services or a promise. A deed is the exception that can make a promise binding without consideration.
- Certainty: the essential terms must be complete and clear enough to enforce.
- Capacity: the parties must have legal capacity to contract.
- Legality: the agreement must not be illegal or impossible to perform.
Emails, online checkouts and "I agree" clickwrap can all satisfy these elements. The Electronic Transactions Act 1999 (Cth) provides that a transaction is not invalid merely because it took place by electronic communication, and that an unaddressed proposal to form a contract, such as an online advertisement, is generally treated as an invitation to treat.
Draft the essential terms in plain English
The drafting itself does not need legalese. What it needs is completeness and precision. At a minimum, cover:
- Parties: correct legal names, ACNs and capacities.
- Scope: exactly what is included and what is excluded.
- Fees and payment: rates, milestones, due dates and any late payment consequences.
- Timing: start date, delivery dates, term and renewals.
- Obligations and service levels: what each side must do, and to what standard.
- Variations: how scope or pricing can be changed.
- Liability and risk: limitation of liability, indemnities and insurance requirements.
- Intellectual property: who owns what, and any licences granted.
- Confidentiality and privacy: how information is protected and used.
- Termination: rights to end the contract for convenience and for breach.
- Dispute resolution: negotiation or mediation steps, governing law and jurisdiction.
- Execution: how the contract will be signed and dated.
If you are working from a template, tailor it to the actual deal and to Australian law. Vague or missing terms around scope and pricing are the most common source of contract disputes.
Check the contract against the law that applies
Before signing, check the terms against the regimes that apply to your situation.
If you supply goods or services to consumers, the consumer guarantees in the Australian Consumer Law (ACL) apply and cannot be contracted out of. Section 64 of the ACL, which sits in Schedule 2 of the Competition and Consumer Act 2010 (Cth), voids any term that excludes, restricts or modifies the guarantees. For goods or services not ordinarily acquired for personal, domestic or household use, s 64A allows liability to be limited to repair, replacement or re-supply, but only in that narrow way. The unfair contract terms regime in s 23 of the ACL voids unfair terms in standard form consumer and small business contracts, and penalties can now apply for proposing or relying on such terms.
Privacy law may also bear on your contract. The Privacy Act 1988 (Cth) and the Australian Privacy Principles generally apply to businesses with an annual turnover above $3 million. Section 6D of the Act defines a small business as one with an annual turnover of $3 million or less, but carve-outs mean some smaller businesses are still covered, including health service providers, businesses that trade in personal information for a benefit, contracted service providers for Commonwealth contracts and credit reporting bodies. If the Act applies to you, your contract should sit alongside a clear privacy policy and compliant data practices.
If the contract is an employment agreement, it must comply with the Fair Work Act 2009 (Cth), the National Employment Standards and any applicable modern award or enterprise agreement. A contractor relationship raises different questions, and misclassifying an employee as a contractor carries its own risks.
Finally, financial services, health, building and construction, liquor and transport are all regulated industries that impose mandatory terms or disclosure requirements. If you operate in one of these sectors, build those requirements into the contract from the start.
Execute the contract properly
Most contracts can be signed in wet ink or electronically. Under the Electronic Transactions Act 1999 (Cth), a signature requirement under a Commonwealth law is met where a method identifies the signer, indicates their intention to sign, and is as reliable as appropriate in the circumstances (s 10), and writing and signature requirements can generally be satisfied electronically (ss 8 and 9). The parties' agreement to use electronic signatures, and any audit logs or version histories, are worth keeping as evidence.
There are exceptions. Deeds and certain property, statutory and court documents may still require specific formalities under state and territory legislation, such as witnessing or paper originals. For companies, the safest approach is to execute under s 127 of the Corporations Act 2001 (Cth), which lets the counterparty rely on the execution without further inquiry. A company can also execute a deed under s 127, expressed to be a deed, without the deed being witnessed, and company deeds signed under s 127 can be in electronic form. An individual's deed, by contrast, generally needs to be signed in front of a witness under state legislation.
If you are unsure whether a particular document can be signed electronically, wet ink is the conservative choice. Keep a clear evidence trail either way: signed copies, audit logs, IP addresses and version histories all help if the signature is later challenged.
Store, monitor and vary
Execution is not the end of the process. Store the signed contract securely, calendar the dates that matter (deliverables, renewal windows, price reviews, notice periods) and nominate someone to own each contract and monitor performance against it.
When circumstances change, document the change. A formal variation, a side letter or a fresh agreement can all work depending on what is changing, but a verbal side deal that contradicts the written contract creates exactly the kind of ambiguity that produces disputes.
Where the process usually goes wrong
These are the points where the process most commonly stalls or fails.
- The wrong entity or signatory: signing as an individual when the contract is with your company, or accepting a signature from someone without authority, can make the contract unenforceable against the party you intended to bind.
- A template that was never tailored: generic terms miss state-specific writing requirements, ACL carve-outs and industry rules, and carry clauses that contradict the actual deal.
- Vague scope or pricing: "reasonable additional work" and "as agreed from time to time" are not terms a court can enforce, and disputes over scope are the most common contract litigation.
- E-signature carve-outs missed: signing a deed or a property document electronically where state legislation requires more can leave the document invalid.
Where a lawyer fits in
Most of this process is something a business can drive itself, but a lawyer adds value at specific points. A legal practitioner will usually review the deal and the parties' identities before drafting, draft or tailor the contract to the transaction and the governing jurisdiction, and check it against the ACL, privacy, employment and industry regimes that apply to your business. They will also advise on the right execution method, including s 127 signing and deed formalities, negotiate terms with the other side and explain what each concession means, and troubleshoot if a signature is rejected, a variation is needed, or a dispute emerges over what was agreed.
The cost of advice is small against the cost of a contract that does not say what the parties thought it said. If the deal is large, long-running or regulated, have a lawyer review it before signing rather than after.
What decides whether your contract holds up
The step that most often determines whether the process succeeds is the drafting: whether the essential terms are certain in writing before performance begins. Offer, acceptance, consideration and intention are usually present in any genuine commercial deal. What distinguishes an enforceable contract from an argument is a written record that states precisely who does what, for how much, and by when, and that complies with the few legal requirements that apply to it. That is the stage worth slowing down for.
The rest of the process follows from it. Identify the parties and their authority, agree the deal, draft the terms in plain English, check the contract against the ACL, privacy and employment rules, execute it properly for the entity signing, and store and vary it in writing. Do those things and your contract will be binding, enforceable and useful when you need it most.